 |
Oil Filter Crushers
Ben Pearson has put its 50 years of automotive experience
into the design and development of the CrushMaster oil filter
crushing system. |
 |
CrushMaster-2
Oil Filter Crusher
 The
CrushMaster 2 is built tough, for years of trouble-free operation.
Made of solid steel plate construction, the CrushMaster 2
oil filter crushing system is designed for heavy-duty use,
and will accommodate both standard size filters and heavy-duty
truck filters up to 16" in height. Built-in operator
convenience and safety features include convenient waste oil
drain connections, easily located on/off switch for safe operation,
and heavy-duty 2hp motor delivering 37,500 pounds of crushing
force. The optional stand, which accommodates both CrushMaster
models, is built to withstand years of punishment and is designed
with a heavy-duty grated top for draining of filters before
crushing. The CrushMaster 2 from Ben Pearson, it's a heavy-duty
oil filter crusher built to perform. |
Features
- Electric-Hydraulic Operation
- 37,500 lbs. of crushing force
- Able to crush up to four automotive spin-on filters
at one time
- Backed by a five-year limited warranty and a nationwide
service center network
|
- Heavy-Duty 2 HP Motor Totally Enclosed, Fan-Cooled
- Clean and efficient design can be connected to
a variety of waste oil containers
- Made in the U.S.A
|
| CrushMaster-2 Dimensions
& Specifications |
| Height |
41-1/2" |
| Width |
25" |
| Depth |
27" |
| Weight |
400 lbs. |
| Crushing Chamber Height |
16" |
| Crushing Chamber Width |
9-1/4" |
| Crushing Chamber Depth |
9-1/4" |
| Electric Power Required |
208-230V 1-phase |
| Catch Basin Connection |
1-1/2" NPT female |
| Height on Deluxe Stand |
83-1/2" |
| Floor Space for Deluxe Stand |
30" wide x 26" deep |
| Cycle Time |
12 seconds |
|
|
CrushMaster-1
Oil Filter Crusher
 The
CrushMaster 1 oil filter crusher operates on normal shop air,
delivers 13,572 lbs. of crushing force at 120 PSI, accommodates
all standard oil filters and was designed for high-volume
use.
Solid steel plate construction and built-in safety features
assure years of safe, maintenance free operation.
If you're looking for an oil filter crusher that will hold
up over years of heavy-duty work, check out the CrushMaster
1 oil filter crusher from Ben Pearson. It's built tough. It's
built to last. An optional space saving tubular stand
is available for the Crushmaster 1 model. |
Features
- 100% air operated for speed and low maintenance
- Able to crush up to four automotive spin-on filters
at one time
- Backed by a five-year limited warranty and a nationwide
service center network
|
- Crushing chamber door is prevented from opening
if the ram is in any position other than fully raised
- Clean and efficient design can be connected to
a variety of waste oil containers
- Made in the U.S.A
|
|
 |
| CrushMaster-1
Dimensions & Specifications |
| Height |
27" |
| Width |
13-3/4" |
| Depth |
18" |
| Weight |
255 lbs. |
| Crushing Chamber Height |
9" |
| Crushing Chamber Width |
8" |
| Crushing Chamber Depth |
8" |
| Air Inlet |
1/4" NPT female |
| Air Pressure Required |
100-180V 1-phase |
| Catch Basin Connection |
3/4" NPT female |
| Height on Tube Stand |
68" |
| Height on Deluxe Stand |
71" |
| Floor Space for Tube Stand |
29" wide x 22-5/8"
deep |
| Floor Space for Deluxe Stand |
30" wide x 26" deep |
| Cycle Time |
11-20 seconds |
|
Back to Top
|
|
