Waste Oil Furnaces INOV8 furnaces come in three popular sizes: 130,000 BTUs, 240,000 BTUs and 450,000 BTUs providing your company virtually free heat when using your waste oils. These furnaces can burn many different types of approved oils. Standard features include the patented INOV8 burner, a prop fan, 120-volt wall thermostat, a barometric damper, a floating oil pickup assembly that includes an in-line filter and check valve, the complete installation & maintenance manual, spare fuses and a spare filter.

Furnace Specifications

Typical Installations

Return on Investment Calculator

Why INOV8?

Stack Emissions

Model F-125 - This 125,000 input unit heater is a perfect size for the small garage that has limited space and heating needs. This unit heater uses the B200 burner in an aluminized heat exchanger consuming .84 gallons per hour to heat about 2,500 square feet. The outside of the INOV8 F-125 furnace looks similar to the standard "straight-shot" design but disguised inside are many unique features; features that promise to revolutionize the waste oil burning industry. This little dynamo provides high heat-transfer efficiency via a "counter-flow" heat exchanger that may also be used as a make-up air furnace. Removal of ash is easy through the "hinged door" that exposes the entire combustion chamber, and in an "ash collector" prior to the chimney. If space is tight, this furnace can be installed either horizontally or vertically. If negative pressure is a problem in the building, this furnace also comes with openings to install optional sealed combustion. The INOV8 F-125 Waste Oil Furnace Includes: The cabinet, burner, barometric damper, floating pick-up assembly (includes check valve, an in-line filter, a tank fitting, piping and a float device), 120-volt wall thermostat, hanging brackets & bolts, blower fan assembly (standard), automatic clean-out needle and an automatic vent system.

Model F-200 -The most popular selling size is the model F200 furnace, which has an input of 240,000 BTU's and will heat a typical 5,000 square foot facility consuming 1.68 gallons of waste oil per hour. This furnace mounted on the bench tank is the most popular selling combination because of its efficiency, ease of installation and maintenance. The INOV8 F-200 Waste Oil Furnace Includes: The cabinet, burner, barometric damper, floating pick-up assembly (includes check valve, an in-line air filter, a tank fitting, piping & a float device), 120-volt wall thermostat, hanging brackets & bolts, prop fan (standard), automatic clean-out needle, and an automatic vent system. optional blower fan available. The INOV8 300-gallon tank supports the furnace at the required 8 feet. The tank includes a complete oil line, tank gauge, stands and a specially designed settling area inside.

Model F-450 - For businesses that have extraordinary heat needs and sufficient quantities of waste oil the F450 furnace is their answer. This unique design features a fire down configuration of the burner and all heat exchanger surfaces are vertical to prevent the build-up of ash. This extends the time between cleaning. The heat exchanger tubes are separated into heat zones allowing for independent expansion preventing stress fatigue on the steel. Like our other furnaces, it is fully cleanable and very energy efficient. In addition this furnace comes with a squirrel cage blower to allow ducting to distribute the hot air. The F450 will heat up to 10,000 square feet while burning 3.78 gallons per hour of waste oil. Unique features of this furnace include "fire-down" burner configuration, vertical combustion chamber & heat exchanger surfaces, make-up air, fully ductable and the highest efficiency furnace in the industry. It has the same SAFE, CLEAN and RELIABLE features as all INOV8 products. SAFE Because of... Industrial Control Pre-start self-diagnostics Ultraviolet flame sensor 4 sec. flame interruption 10 sec trial for ignition CLEAN Because of... Complete combustion Filtration of heated oil 3-pass heat exchanger Auto vapor elimination Swing doors for cleaning RELIABLE Because of... Automatic nozzle clean out Burns most types of oils Aluminized & stainless stl. Ceramic target Oil heated at high velocity The INOV8 burner is the same used on the F-200 furnace having the same unique features that guarantee SAFETY, CLEAN BURNING and the most RELIABLE used oil burning device available. Competitors claim the INOV8 burner is "overkill" in the area of safety, but we strongly believe our design and use of industrial rather than residential controls is important in industrial settings such as your shop. The burner requires NO monthly or even annual maintenance, simply a change of filters. Our customers provide most of their own repairs right in their own shops. The INOV8 F450 Waste Oil Furnace Includes: The cabinet, burner, barometric damper, floating pick-up assembly (a check valve, an in-line filter, a tank fitting, piping & floating device), 120-volt wall thermostat, hanging brackets & bolts, prop fan (standard), automatic clean-out needle, and an automatic vent system. The optional INOV8 300-gallon tank supports the furnace at the required 8 feet. The tank includes a complete oil line, a tank gauge and the stands.

Safety is our highest priority and is the reason we use the only industrial-rated electronic burner control in the industry, with a UV sensor, pre-purge, pre-heat, and auto-restart ignition plus safety lockout. Our exclusive needle valve prevents nozzle drip and clears obstructions at each ignition cycle. Reliable Operation is a given, with the patented vapor eliminator and integral fuel pump ensuring smooth and uninterrupted combustion for safe, clean, and reliable burn cycles. Maintenance Friendly with a swing-out burner facilitating periodic cleaning of the combustion chamber and a built-in hour meter for scheduled tune-ups. Clean Burning means thermal efficiency, whereby usable heat is delivered to the workspace by virtue of the high-efficiency heat exchanger, which is constructed of durable, corrosion-resistant aluminized steel. Zero smoke and near-perfect combustion efficiency makes for clean equipment and clean stack emissions. Fuel Versatility is our strong suit, as the waste oil furnaces will accept a wide range of combustible liquids including, but not exclusively: diesel, number 1 & 2 fuel, all weights of crankcase oil including synthetic, 90-weight gear, transmission and hydraulic fluid, etc. Customer Service is just a phone call away with ready parts and knowledgeable technicians to keep your new investment running perfectly.

Industrial Safety Controls Fireye Combustion Control Ultra-Violet Flame Detector 90 Second Pre-Purge Continual Proof of Atomizing Air Continual Proof of Combustion Air Safe-Start Sequence 10 Second Trial for Ignition Timing 3 Second Flame Failure Response Timing Safety Shut-Down Indicator (Visual) Fuel Shut-Off by Electrically Operated Valve & Mechanically Driven Needle into Oil Nozzle Line Voltage Thermostat Controlling All Burner Power

Tested Fuels Grade #2 Oil Used Crankcase Oils Transmission & Hydraulic Oils Crankcase Oil w/ 10% Gasoline 90 Weight Gear Box Oil 175 Weight Heat Transfer Oil Mineral Spirits Solvent Machine Shop Cutting Oil Vegetable Oils Synthetic Oils Commercial & Military Jet Fuels Grades #1, #3, & #4 Heating Oils

Bench Tank INOV8 has a bench tank specifically designed to accommodate waste oil and is unique to the industry. It is actually a tank within a tank. Within the 300 gallon tank is a smaller container where the oil is first placed. This allows for time for water and sludge to settle to the bottom while the best oil spills over the top into the main part of the tank. From there the oil is drawn for the burner fuel. Steel supports are secured to the back of the tank and hold the smaller furnaces eight feet above the tank - the recommended height for shops in the United States. Included with the bench tank are the necessary oil lines and a tank gauge. The tanks are also painted with an industrial powder coat paint to complement the furnace color. Installations using this bench tank are easy and convenient. Customers need only supply the chimney, electrical and a compressed air connection. INOV8 also has available double and single wall tanks from other suppliers that will accommodate any size and configuration requirement.

Tank Specifications

Tank Dimensions	72"L x 34"W x 34"H
Tank & Stands	300 Gallon Bench Tank
Tank Finish	Powder Coated
Weight	450 Lbs.

Back to Top